Kit plombége de porte anti-x 0,50mm EQ PB
This radiation protection kit has been specially composed to seal an anti-x door with 0.50mm lead equivalent.
This kit is particularly suitable for filling doors in dental offices, bone densitometry rooms, mammography rooms.
However, it is necessary to produce a calculation note in order to choose the required lead equivalence.
The door panel is 1cm longer than the door in order to fully compensate for any possible lack of squareness.
Pre-painted assembly to be mounted glued or nailed to the existing door.
Kit contents:
- A set of 2 leaded side champlats with a 45 ° cutout in the upper part
- A high leaded cross member with a 45 ° cutout at the ends.
- A pre-painted 0.5mm leaded hardboard door panel
This kit is particularly suitable for filling doors in dental offices, bone densitometry rooms, mammography rooms.
However, it is necessary to produce a calculation note in order to choose the required lead equivalence.
The door panel is 1cm longer than the door in order to fully compensate for any possible lack of squareness.
Pre-painted assembly to be mounted glued or nailed to the existing door.
Kit contents:
- A set of 2 leaded side champlats with a 45 ° cutout in the upper part
- A high leaded cross member with a 45 ° cutout at the ends.
- A pre-painted 0.5mm leaded hardboard door panel
- Lead equivalence mm
- 0,5
- Material
- Bois
- Coating
- Brut à peindre
- UGAP reference
- 2094591
- Width mm
- 1030
- Height mm
- 2040
- Gross weight
- 20
- Net weight
- 18
6 other products in the same category:
Tap to zoom
