Vest Bloc FVK Man 65 cm size XS Eval lead Pb 050/025

BURLINGTON FVK EVAL vest with total overlap which offers an exceptional weight/lead equivalence ratio intended for all practitioners during short and medium duration interventions in frontal and profile incidence.
Its cut allows great comfort during use thanks to the reduction in weight and guarantees protection at all points on the front and back for the duration of the examination.
The FVEST model is a one-piece wraparound vest with lateral Velcro closure. The vest also has thick shoulder pads for better comfort.
The FVEST vest is particularly suitable for interventional workers in radiography, scanner, cardiology for interventions. over 30 minutes.
This vest model is suitable for workers in general radiology, mammography, dentistry as well as computed tomography and nuclear medicine.

EVAL MATERIAL FOR A PERFECT PROTECTION OF YOUR STAFF:
- The FVEST EVAL series has been tested and approved from 50kV to 150kV in accordance with international standard IEC61331-1:2014.
- The FVEST EVAL series guarantees a linear lead equivalency regardless of the energy used because of its protective material base 100% lead
- The FVEST EVAL series also benefits from the extension to 150kV allowing the use of the aprons during interventions involving an exposure to a radiation of energy greater than 125kV.
- The FVEST EVAL series offers lead equivalence determined as described in IEC61331-1:2014, by the inverse wide beam geometry method.

CATEGORIES:
In accordance with the new standard IEC 61331-3:2014, the FVEST EVAL vest is delivered in the category:
- Category HC (Intensive use closed) Lead Equivalent 0.35/0.25mm or 0.50/0.25mm

TECHNICAL DATA :
- Full-height lateral closure with Velcro for quick installation and removal of the apron
- Thick shoulder pads for greater comfort
- Standard chest pocket

MATERIAL:
- BURLINGTON EVAL
- Rubber base, Lead (Pb) Atomic number 82
- Weight of 3.62 kg / m� in lead equivalence 0.25mm (Ws)
- Weight of 4.9 kg / m� in lead equivalence 0.35mm (Ws)
- Weight of 7.11 kg / m� in lead equivalence 0.50mm (Ws)
- Also in a heat reformulation manufacturing concept, this material is recycled to 98%
- The recycled material then makes it possible to manufacture the raw material again before rolling.

30 COLORS:
- All our tissues are treated Anti bacterial
- 4 PVC surface colors with patterns - Easy to clean
- 12 Polyurethane (PU) surface colors, plain or with patterns - Easy to clean
- 14 Plain or patterned Nylon surface colors - High resistance

WARRANTY:
- 2 YEARS

CERTIFICATION:
- CE 89/686/CEE
- Personal protective equipment - Class 3
- Laboratory approved according to the new standard NF EN 61331-3:2014