Warmer dry incubator for contrast agents

Warmers allows the use of fluids at temperatures close to the human body one.

Temperature regulation range allows to warm fluids according the different irrigation, infusion and contrast fluid manufacturer instructions.

Can be used as well to dry surgical instuments before the stetilization process.

Electronic control with PID algorithm ensures the correct achieving and maintenance of selected temperature.
Warmer cycle time can be regulated by microprocessor control or set on infinite mode for continuous use.
Forced ventilation system assures temperature homogeneity of various load configurations.
Microprocessor controlled system oversees preset parameters respect. This, together with the door closure by key, allow a safe fluids storage.

This chamber is suitable for contrast products used in radiology, MRI, City Scanner and vascular explorations.

GENERAL SPECIFICATIONS:
Temperature control from 30°C / 86°F to 70°C / 158°F
Power supply: 230V (100V on request)
Internal dimensions: 500 x 360 x 320 (h) mm
External dimensions: 700 x 540 x 470 (h) mm
Removable shelves: 2
Weight: 18 kg
Capacity: 58L

WARMING PERFORMANCES:
The device warms up 8 liters to 37-39°C / 102°F in about 6 hours (with a load uniformly distributed).
Higher loads are possible, but with longer heating times.

TECHNICAL SPECIFICATIONS:
Automatic fan for forced air circulation (possiblility to set different speed levels or to exclude)
Entirely made of stainless steel
Tempered glass door with key
Electronic control
Heat insulated with fiberglass
Time regulation from 0 to 600 minutes and infinite time
Automatic re-start in case of black-out
Digital display for temperature and time (Resolution 0,1°C / 32°F)
Visual and ringing alarms for over temperature, temperature fall ,probe damage, broken heating element, black out
Over temperature safety thermostat
Supplied with Schuko plug