Set of two 0,8mm copper plates: 1 with centered hole & 1 without hole according directive ANSM 08/12/08
Set of two copper plates for dental panoramic IQC
Set consisting of a 0.8mm thick copper plate not drilled in the center and a 0.8mm copper plate drilled in the center.
This set of copper plates allows the realization of internal quality controls (IQC) of radiographic digital dental panoramics.
Each copper plate can be mounted on the test patern of the brand SIEVERT TECH but the plates can also be used with the test paterns of other brands.
In accordance with the ANSM decision of 08/12/2008, the copper plate must be placed in the x-ray beam between the test tool and the X-ray source.
Start the test with the drilled 0.8mm copper plate and if the image is not satisfactory, add the second undrilled 0.8mm copper plate.
Set consisting of a 0.8mm thick copper plate not drilled in the center and a 0.8mm copper plate drilled in the center.
This set of copper plates allows the realization of internal quality controls (IQC) of radiographic digital dental panoramics.
Each copper plate can be mounted on the test patern of the brand SIEVERT TECH but the plates can also be used with the test paterns of other brands.
In accordance with the ANSM decision of 08/12/2008, the copper plate must be placed in the x-ray beam between the test tool and the X-ray source.
Start the test with the drilled 0.8mm copper plate and if the image is not satisfactory, add the second undrilled 0.8mm copper plate.
- Material
- Cuivre
- Coating
- Brut
- Colors
- Cuivre
- Length mm
- 80
- Width mm
- 80
- Thickness mm
- 0,8
- Net weight kg
- 0,20
- Packing
- 8x8x0,2cm
- Gross weight kg
- 0,40
- Sterile
- Non stérile
- CE
- Sans certification
116509
5 other products in the same category:
Tap to zoom
