Wall stand disinfection tank for ultrasound probes
Disinfection set consisting of a 2.5L tank to receive any soaking product for the pre-disinfection and disinfection of ultrasound probes.
The device is equipped with:
- A stainless steel wall bracket for fixing to the wall with two buttonhole on the back
- A stainless steel pole that allows adjustment in height and width of the position of the probe so that it is not in contact with the bottom and the edge of the tray
- A cap cover for the conservation of baths
Advantages :
. Deep tray (256mm) for perfect soaking of the endocavitary ultrasound probes
. Wide tray (124mm) for dipping endocavitary and superficial probes
. Tray protective cover for keeping the disinfection solution clean
. Stainless Steel Wall Mount Plate: LxWxD 260x120x160mm
. A stainless steel pole of diameter 6mm and height 600mm
. Easy to clean set
. Smooth finish for perfect hygiene of the device
. Set of three optional spare tank
The device is equipped with:
- A stainless steel wall bracket for fixing to the wall with two buttonhole on the back
- A stainless steel pole that allows adjustment in height and width of the position of the probe so that it is not in contact with the bottom and the edge of the tray
- A cap cover for the conservation of baths
Advantages :
. Deep tray (256mm) for perfect soaking of the endocavitary ultrasound probes
. Wide tray (124mm) for dipping endocavitary and superficial probes
. Tray protective cover for keeping the disinfection solution clean
. Stainless Steel Wall Mount Plate: LxWxD 260x120x160mm
. A stainless steel pole of diameter 6mm and height 600mm
. Easy to clean set
. Smooth finish for perfect hygiene of the device
. Set of three optional spare tank
- Material
- Acier inoxydable
- Length mm
- 260
- Width mm
- 120
- Height mm
- 160
- Packing
- CARTON 61x26x17cm
- Gross weight
- 1,78
- Net weight
- 1,58