product

    Sensitometer/densitometer Densonorm 21 i

    Generate PDF
     
    DENSONORM 21 i is a compact combination of a sensitometer and a densitometer with automatic scanner for quality control of X-ray film processing and verification of ghost test films.

    . automatic feeder / scanner system

    sensitometer:
    . 21 steps of density with 0.15 increase step by step
    . 510 nm green peak wavelength
    . Blue color peak wavelength 460 nm
    . Exposure to the flatness of a step: less than D 0.01
    . Repeatability: better than D +/- 0.02 log e
    . Stability over time: better than D +/- 0.02 log e
    . No exposure to low battery voltage
    . Exposure time between 50 and 200 ms for separate green and blue adjustment
    . Mark on the film for a green and blue exhibition

    AUTOMATIC DENSITOMETER
    . Reads 21 levels of step density in less than 5 seconds.
    . Automatic zero calibration
    . Calibration through the provided calibration film (rarely needed)
    . No warm-up time
    . Information displayed via the LCD screen
    . immediate evaluation of the sensitometric band by LCD of these statistics:

    Speed index + contrast Index
    Base and fog
    D step 21
    LE (speed of light) + LK (contrast of light)
    Rel. Speed + Average Gradient
    Presentation of 21 no density
    (adjustable in different languages)

    . RS 232 - interface
    . Measuring range: D: 0,00 - D 4,5
    . Measurement accuracy: +/- D 0.01
    . Measuring area: 3 mm in diameter
    . Measurement time: about 10 seconds
    . Temperature operating range: 15°C - 35°C
    . Stability +/- D0.02

    DENSITOMETER OF POINT
    . Ready immediately for use
    . Density point measurements with measuring arm
    . Length of the measuring arm: 20 cm
    . Measure the results on the LCD screen
    . Calibration possible (by calibration film included)
    . Own light area
    . Measuring range: D0.00 - D4.5
    . Measurement accuracy +/- D0.01
    . Temperature operating range: 15°C-35°C
    . Measure the point 3 mm in diameter
    . Stability +/- 0.01

    TECHNICAL SPECIFICATIONS :
    . Microprocessor controlled
    . Dimensions: 240x85x190 mm
    . Weight: 1500g
    . Power supply: 9 volts supplied by 110 or 220 volt power adapter
    or a firing time running on 9V alkaline batteries
    Additional Information
    AVEC ALIMENTATION SECTEUR
    Gross weight
    2
    Net weight
    1,5

    6 other products in the same category:

    Welcome to VARAY LABORIX

    In accordance with the 2011-2012 law of December 29, 2011 and in order to access the content of our site, we thank you for confirming that you are indeed a health professional.

    YES